Hose fittings and crimped ends
Metal fittings for the permanent assembly of both ends of hydraulic hose.
Product Overview
Hose fittings are the metal components crimped onto both ends of a hydraulic hose to connect it to equipment or pipework. The quality of that connection has a direct bearing on the safety of the system at working pressure. Tose'e Tejarat Sayyalat sources and imports the full range of hose fittings and crimped ends in stainless steel, carbon steel and brass, and assembles them on standard crimping equipment in its own workshop; these products cover working pressures up to 1,500 bar. Fitting dimensions and threads follow the international standards JIC (SAE J514 / ISO 8434-2), metric (ISO 8434-1), BSP (BS 5200) and ORFS (SAE J1453) — the same basis on which Parker's technical catalogue (Triple-Lok, Seal-Lok and 43 Series) is built.
Applications
- Permanent assembly of both ends of high-pressure hydraulic hose
- Connecting hose to hydraulic pumps, cylinders and valves
- Building custom hose assemblies to the project drawing
Material and pressure grade
End-User Industries
Selection by connection type
Each connection standard has its own page with a full assembly torque table and reference dimensions.
JIC 37° fittings
37-degree flare thread, the most widely used hydraulic connection standard in the oil and gas industry.
BSP fittings
British Standard Pipe thread, common on European-designed equipment.
Metric 24° fittings
Metric thread with a 24-degree sealing cone.
ORFS fittings and Code 61/62 flanges
Flat O-ring face seal and metric flange for high-pressure lines.
The full range of hose fittings and crimped ends
A sample of the straight, elbow, ferrule and crimped fittings held in our warehouse, per the Balfit technical catalogue.
General technical specification
| Connection standard | JIC 37° (ISO 8434-2 / SAE J516), metric 24° (ISO 8434-1 / DIN), BSP (BS 5200), NPT (SAE J476) and ORFS (ISO 8434-3) |
|---|---|
| Material | Zinc-plated carbon steel or stainless steel, depending on the application and operating environment |
| Size range | From dash -4 (1/4 inch) to dash -32 (2 inch) |
| Assembly torque | Per the standard torque table for each size and connection type (11 to 208 N·m depending on type and size) |
| Assembly method | Crimping on standard equipment |
| Quality control | Dimensional and leak-tightness inspection before delivery |
Hose-to-ferrule selection table
The table below gives the ferrule code matching each hose grade (per the relevant SAE/EN standard) for the common dash sizes. An "X" means that combination of size and grade does not exist in the standard range. The table is independent of the end thread type (JIC/BSP/metric/ORFS) and is determined by the hose grade.
| Hose grade | REF | 1/4″ (04) | 5/16″ (05) | 3/8″ (06) | 1/2″ (08) | 5/8″ (10) | 3/4″ (12) | 1″ (16) | 1.1/4″ (20) | 1.1/2″ (24) | 2″ (32) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| R3 / 3TE | 10.1220 | 3TE-04 | 3TE-05 | 3TE-06 | 3TE-08 | 3TE-10 | 3TE-12 | 3TE-16 | X | X | X |
| R1T / 1SN | 10.1002 | CNS-04 | CNS-05 | CNS-06 | CNS-08 | CNS-10 | CNS-12 | CNS-16 | CNS-20 | CNS-24 | CNS-32 |
| R2A / 2ST | 10.1003 | CSA-04 | CSA-05 | CSA-06 | CSA-08 | CSA-10 | CSA-12 | CSA-16 | CSA-20 | CSA-24 | CSA-32 |
| R2T / 2SN | 10.1004 | CNS-04 | CNS-05 | CNS-06 | CNS-08 | CNS-10 | CNS-12 | CNS-16 | CNS-20 | CNS-24 | CNS-32 |
| R12 | 10.1012 | X | X | CX06BD | CX08BD | CX10BD | CX12BD | CX16BD | CX20BD | CX24BD | CX32BD |
Technical Catalogue
The full technical catalogue and the hose-to-ferrule selection table for all connection standards are available on request from our sales department.
Request the technical catalogueRequest a Quotation
This website is not an online shop and enquiries are not registered automatically through the site. The fastest route is to send your specification on WhatsApp, or contact us directly on the numbers below.
Send us the hose grade, size, connection type and quantity you require by phone, WhatsApp or email.