Pneumatic valves
Directional and flow control of compressed air in industrial control and automation circuits.
Product Overview
Pneumatic valves control the direction and flow of compressed air in industrial control and automation circuits. Tose'e Tejarat Sayyalat supplies manual (lever) valves, solenoid (electrically operated) valves and emergency stop valves for equipping pneumatic control panels.
Applications
- Control circuits for industrial pneumatic equipment
- Production line emergency stop systems
- Control of pneumatic cylinders and actuators
End-User Industries
Technical Specification
| Actuation type | Manual (lever), solenoid (electrical) or emergency |
|---|---|
| Common electrical control voltage | 24 V DC or 220 V AC, according to the project specification |
| Typical working pressure | Generally up to around 10–16 bar (depending on valve type and application) |
| Connection | Threaded (commonly BSP/NPT) or push-to-connect, to match the project's pneumatic pipework standard |
| Sub-base mounting standard (industrial valves) | To ISO 5599-1 in sizes D1 (42 mm wide), D2 (52 mm wide) and D3 (65 mm wide) |
| Solenoid interface (NAMUR) | The standard NAMUR interface for mounting solenoids on pneumatic actuators |
In plain terms: An emergency stop valve should always be a mechanically latching type rather than purely electrical, because the circuit must still be able to be cut manually and immediately if the power supply fails. This is a point HSE safety inspections at large industrial plants usually check specifically.
Technical Catalogue
The technical catalogue for pneumatic valves is available on request from our sales department.
Request the technical catalogueRequest a Quotation
This website is not an online shop and enquiries are not registered automatically through the site. The fastest route is to send your specification on WhatsApp, or contact us directly on the numbers below.
Send us the valve type, control voltage and connection you require by phone, WhatsApp or email.